課程名稱 |
印刷元件製作技術 Printing Technology for Device Fabrication |
開課學期 |
108-1 |
授課對象 |
工學院 化學工程學系 |
授課教師 |
廖英志 |
課號 |
ChemE5059 |
課程識別碼 |
524 U2210 |
班次 |
|
學分 |
3.0 |
全/半年 |
半年 |
必/選修 |
選修 |
上課時間 |
星期三6,7,8(13:20~16:20) |
上課地點 |
普204 |
備註 |
化工選修課程。 總人數上限:15人 |
Ceiba 課程網頁 |
http://ceiba.ntu.edu.tw/1081ChemE5059_ |
課程簡介影片 |
|
核心能力關聯 |
核心能力與課程規劃關聯圖 |
課程大綱
|
為確保您我的權利,請尊重智慧財產權及不得非法影印
|
課程概述 |
課程概述 This course will introduce the advancements and challenges of using additive printing approaches to fabricate simple and complex electronic devices. Attendees will learn about the foundations of printing technology. This course will be delivered in an easy to comprehend manner, focusing on information important to those new to printing technology, including:
- An overview of manufacturing strategies
- Survey of technologies used for producing printed devices
- Methods to integrate printed devices
This course will also equip students with first-hand, up-to-date knowledge regarding commercial or industrial aspects such as the management of intellectual property, regulatory requirements and standards, and strategies for effective communication in an interdisciplinary environment. Finally, several industrial examples of printed device or products will be demonstrated to highlight key issues and pitfalls.
|
課程目標 |
Students gain a much understanding of important issues for high-performance printed devices and related applications in the industrial world. |
課程要求 |
None |
預期每週課後學習時數 |
|
Office Hours |
|
指定閱讀 |
Lecture notes from the instructors or invited speakers |
參考書目 |
Introduction to Printed Electronics, by Katsuaki Suganuma, ISBN 978-1-4614-9625-0
Flexible Electronics: Materials and Applications, by William S. Wong, ISBN 978-0387743622 (NTU library for electronic copy)
|
評量方式 (僅供參考) |
No. |
項目 |
百分比 |
說明 |
1. |
期末報告 |
30% |
分組
紙本 及 上台報告 各占一半 |
2. |
課堂參與 |
40% |
點名及發問(包括參訪,每次出席佔10%) |
3. |
課堂心得報告 |
30% |
課堂資訊或實作成品 |
|
週次 |
日期 |
單元主題 |
第1週 |
9/11 |
課程概述 |
第2週 |
9/18 |
墨水製作 與 噴墨印刷 |
第3週 |
9/25 |
停課一次(因參訪需要交通時間,由此周抵扣) |
第4週 |
10/2 |
膠料製作與網版印刷
|
第5週 |
10/9 |
印刷電路板製作
|
第6週 |
10/16 |
平面塗佈與版印技術
|
第7週 |
10/23 |
3D列印原理與製作 |
第8週 |
10/30 |
參訪 三緯 列印 |
第9週 |
11/6 |
停課一次(因參訪需要交通時間,由此周抵扣)
|
第10週 |
11/13 |
紙基材元件製作 |
第11週 |
11/20 |
電子調控裝置 |
第12週 |
11/27 |
軟性印刷電子 |
第13週 |
12/4 |
RFID 製作與測試 |
第14週 |
12/11 |
期末報告 準備週 |
第15週 |
12/18 |
參訪 正美企業股份有限公司 |
第16週 |
12/25 |
期末報告
|
第17週 |
1/1 |
元旦 停課 |
|